Click the links below to view Sennheiser's videos on the S1 Digital headset:
The S1 DIGITAL aviation headset incorporates the latest in digital technology. Featuring NoiseGard™ / digital noise compensation and excellent passive noise attenuation, the headset is currently the only one on the market that provides optimum protection against cockpit noise over the entire frequency range. The S1 DIGITAL has been designed for use in noisy one- and two-engine propeller aircraft and helicopters.
- Smart Update digital ANR customizes noise reduction to the user's aircraft environment
- Headband tension adjust for customized comfort
- Foldable ear cups
- Treble boost for customized audio clarity
- Peak-level protection for hearing protection
- Ear pad comfort zones end squeeze on your glasses
- Specially designed communication and music filters optimize sound quality
- Bluetooth phone and music connectivity
- Built-in mic bias voltage for cell phone use
- Fail safe operation - headset can be used as a conventional, passive headset in case of power failure
| Headphone |
|
Transducer principle
(Headphones) |
dynamic |
| Ear coupling |
circum-aural, closed |
Transducer principle
(Headphones) |
20 - 16.000 Hz |
Nominal impedance
(active/passive) |
180/130 Ohm mono, 360/260 Ohm stereo |
| Sound pressure level (SPL) |
98 dB SPL at 1kHz, 1V, 90 dB at 1 kHz, 1mW |
Max. Sound pressure level
(aktiv) |
115 dB at 1 kHz |
| THD, total harmonic distortion |
1% at 98 dB SPL |
| Contact pressure |
approx. 5 - 7 N |
| Microphone |
|
Transducer principle
(Microphone) |
BKE S1-P pre-polarized condenser microphone, noise-compensating |
Frequency response
(microphone) |
100 Hz - 10.000 Hz |
| Output voltage |
20 - 80 mV/Pa adjustable, 35 mV/Pa factory pre-set |
| Impedance |
150 - 2.200 Ohm terminating |
| Operating voltage (stand alone) |
8 - 16 VDC |
| Weight w/o cable |
approx. 410 g / approx. 14.5 oz |
| Cable length |
approx. 1.9 m / approx. 6.23 ft. |
| Connector Headphones |
6.3 mm / |
| Connector Microphones |
PJ-068, 5.25 mm (equivalent) |
| Operating time (Battery) |
approx. 40 h with lithium batteries AA |
| Operating temperature |
-15°C... +55°C |
| Storage temperature |
-55°C... +70°C |
| Bluetooth |
|
| Bluetooth version |
Version 2.1 + EDR |
| Range |
bis 10 m |
| Transmission frequency |
2,4 GHz - 2,48 GHz |
| transmission power |
8 dBm |
| Technology |
HSP, HFP, A2DP, AVRCP supported profiles |
| Codec |
SBC |
- S1 DIGITAL headset
- Transport case for headset and accessories
- Cable clip
- Belt clip
- Wind and pop screen
- Quick Guide
- Operating instructions
FREE overnight shipping to the U.S.!
For a limited time, receive FREE overnight shipping to the U.S. on the Sennheiser S1! Please note that if you are placing an order online, make sure to select the overnight shipping option and the amount will be credited back to your card once the order has been processed.